Skip to main content
423-892-0232

Residential / Commercial

Water Heater Replacements

When the hot water runs out early, comes out rusty, or the tank starts weeping at the bottom, it is usually time to talk replacement.

Brass valves, red shutoff handles and a flexible gas connector beneath a water heater

Water heaters tend to fail on their own schedule. Some give plenty of warning with rumbling, rust-colored water or a slow drip at the base. Others simply stop. Either way, a replacement should be sized for the household or building, connected to the existing gas or electric service safely, and piped with working shutoffs and a properly routed relief line.

We replace water heaters for homes and for commercial spaces. Before installing, we look at what is there now: the venting for a gas unit, the electrical supply for an electric unit, the condition of the supply valves, and whether the space and drain pan arrangement make sense.

If you are not sure whether your heater needs replacing or just a repair, call and describe the symptoms. Sometimes a part is the answer. When the tank itself is leaking, it is not.

Know the signs

Signs your water heater may be done

  • 01Water pooling or rust around the base of the tank
  • 02Hot water running out much faster than it used to
  • 03Rust-colored or sandy hot water
  • 04Rumbling or popping noises as it heats
  • 05Pilot or burner problems on an older gas unit
  • 06A tank that is simply old and you would rather plan ahead

Our approach

How we go about it.

  1. 1

    Describe the unit

    Fuel type, rough age, size and the symptoms you are seeing help us prepare.

  2. 2

    Check the setup

    Venting, gas or electrical supply, valves and the space the heater sits in.

  3. 3

    Replace and connect

    Remove the old tank, set the new unit and connect it to the existing service.

  4. 4

    Fire it up

    Fill, test for leaks, confirm operation and walk you through the controls.

Questions

Water Heater Replacements: common questions

Do you install both gas and electric water heaters?

Yes. We replace both gas and electric tank water heaters for homes and commercial spaces.

My water heater is leaking. What should I do first?

Turn off the cold water supply valve at the top of the heater. For a gas unit, set the control to off or pilot; for electric, switch off the breaker. Then call us at 423-892-0232.

Can you haul away the old water heater?

Ask when you call. We will tell you how removal of the old unit is handled for your job.

What does a new water heater cost?

We do not publish prices online. Every job depends on what is behind the wall, under the slab or on the plant floor, so the honest answer starts with a phone call to 423-892-0232. We will ask questions, and if the work needs a look in person, we will tell you so.

Request water heater replacements

Tell us about the job.

For anything time-sensitive, please call 423-892-0232.

All fields marked with an asterisk are required. For anything urgent, calling is faster.

Optional
Optional. Up to 10 photos, PDFs, Word, Excel or text files. No video. Photos are resized before sending. Total submission must be under 8 MB.

I agree to receive service-related text messages from East Brainerd Plumbing & Heating Co., Inc. Message frequency varies. Message and data rates may apply. Reply STOP to opt out or HELP for help. Consent is not a condition of purchase. See our Privacy Policy and SMS Terms.

Rather talk? 423-892-0232 or email us

East Brainerd Plumbing & Heating Co., Inc.

Need water heater replacements?

A real person at our East Brainerd Road shop answers the office line. Call, or send a request and we will follow up.